The Aligner for 1/8" shafts/axles

The Aligner for 1/8" shafts/axles

Assembly and Truing Tool. Fits: 1/8in shafts/axles (most USA made HO locomotives, some 'O' gauge axles).

  • Price: $15.95

The Aligner for 3.0mm shafts/axles

The Aligner for 3.0mm shafts/axles

A gear truing tool designed to help check and minimize the gear wobble which often occurs when installing gears on axles and shafts. Such wobble causes binding, noise and early failure in gear boxes as the gear 'moves' laterally back and forth...

  • Price: $15.95

The Aligner for 2.4mm and 3/32" axles

The Aligner for 2.4mm and 3/32" axles

A gear truing tool designed to help check and minimize the gear wobble which often occurs when installing gears on axles and shafts. Such wobble causes binding, noise and early failure in gear boxes as the gear 'moves' laterally back and forth...

  • Price: $15.95

The Aligner for 2.0mm shafts/axles

The Aligner for 2.0mm shafts/axles

A gear truing tool designed to help check and minimize the gear wobble which often occurs when installing gears on axles and shafts. Such wobble causes binding, noise and early failure in gear boxes as the gear 'moves' laterally back and forth...

  • Price: $15.95

The Bender

The Bender

A press bending brake to bend brass, styrene or similar light sheet materials used in model building up to 90 degrees (depending on how far you tighten the press screws). Up to 3in bend length (exact usable length depends on material hardness and...

  • Price: $49.95

The Chopper

The Chopper

One of the most useful tools ever for model builders working in wood or styrene strip materials. An economical rigid, precision tool for cutting model building stripwood and plastic material to length quickly, cleanly. Provides clean, neat,...

  • Price: $34.95

The Chopper II

The Chopper II

No sloppy, “fits all”, cuts any angle (whether it maintains the angle you want or not) complexity. Use the precision mitre guides to assure accurate angle and repeatability. Retains the high precision, extremely sharp, inexpensive single edge...

  • Price: $46.95

The Chopper III

The Chopper III

Same as THE CHOPPER except longer work surface with two additional work stations ready for installation of optional #4914-4 handle assembly. 18in wide base. Used in production work by many professional model builders and kit manufacturers, with...

  • Price: $41.95

The Duplicutter II

The Duplicutter II

This tool was designed by and for model builders who work in styrene plastic to make their model building more efficient, accurate and fun. Several needed functions are performed such as (A) squaring a piece of sheet so that subsequent pieces are...

  • Price: $44.95

The Puller

The Puller

The Puller (on the right) (illustrated upper right with ‘V’ plate in place) An economical rigid, precision tool for removing wheels, drivers, and gears from axles and shafts.

  • Price: $24.95

The Puller II

The Puller II

THE PULLER II  Same as The Puller except: accepts drivers, wheels, gears up to 1" O.D.; maximum press depth: 1-1/2".

  • Price: $24.95

The Puller III

The Puller III

A large, heavy duty, precision machined PULLER with tool steel reinforcement and puller plate for those heavy duty and larger scale jobs found in O scale and Large Scale modeling work. Economical rigid, precision tool for removing wheels,...

  • Price: $56.95

The Puller IV

The Puller IV

#2101-6 The Puller IV $24.95 A special small, tight access version Puller to access the 12 tooth gear that fails on the PSC HO 20 ton Shay.

  • Price: $24.95

The Puller V

The Puller V

For tinplate 3 rail conversion jobs, etc. A finger style, heavy duty, precision machined PULLER with tool steel adjustable fingers to fit in minimum clearance jobs (fingers can be ground or filed thinner if necessary). Designed for O scale...

  • Price: $44.95

The Puller VI

The Puller VI

#85-4 The Puller VI $32.95 An expander style, heavy duty, precision machined PULLER with tool steel pulling plates to fit in minimum clearance jobs with at least 1/4in space between parts to be separated.

  • Price: $32.95

The Quarterer I

The Quarterer I

Quartering is the term for setting crankpins of locomotive drivers at 90 degrees ‘crank’ apart (similar to an automobile crankshaft). Accurate quarter of all drivers in a set to the same angle (whether exactly 90 degrees or not) is critical for...

  • Price: $39.95

The Quarterer II (S, OO, HO, HOn3) all metal

The Quarterer II (S, OO, HO, HOn3) all metal

Rugged, precision machined all-metal tool for the professional model craftsman demanding long life accuracy and consistant repetitive performance. Offers precision in quartering model railroad steam locomotive drivers up to 1-1/2in (39mm)...

  • Price: $140.95

The Quarterer III - (S-O-LS scale models).

The Quarterer III - (S-O-LS scale models).

Offers precision in quartering model railroad steam locomotive drivers up to 2in (50mm) diameter (90in in O scale, 55in in Large Scale) with axles up to 1/4in in diameter (see #64-4 for smaller drivers such as HO and small ‘S’). Minimum crank...

  • Price: $185.95

The Riveter+

The Riveter+

 The Riveter+ attachment turns the SENSIPRESS+ into a precision alignment and spacing rivet embosser, working as a calibrated advancing table (not a milling table).

  • Price: $119.95

The Sensipress+

The Sensipress+

A sensitive arbor press small enough to give you that delicate touch for working with fine miniature models and parts, yet sturdy enough to apply all the pressure you need - up to 250 pounds pressure.

  • Price: $129.95

The True Sander

The True Sander

A tool that provides accurate, quick finish sanding of end cuts on wood or plastic parts for fine fit.

  • Price: $41.95